Elmed Electrosurgical Units with Spark-Gap Generators


In the realization that many urologists prefer spark-gap generated coagulation current for transurethral resection, ELMED continues to provide to the profession such units, in addition to our line of solid-state generators.

The unique feature of the spark-gap generator and its current is the great spread of the frequency spectrum and output voltages, ranging between almost 0-14,000 Volts, peak to peak, at frequencies between 200 KHz and 600 KHz. This permits the arcing or fulguration in such techniques as are described in the term "spray coagulation". Many urological procedures depend on this high voltage, randomly modulated current for the coagulation of bleeders and resection of tissue inside the bladder.

ELMED ELEKTROTOM 600 RFS


The ELMED ELEKTROTOM 600 RFS has a powerful valve and spark-gap generators combined in a water-sealed case mounted in a stainless steel mobile cabinet with a storage drawer in the rear. The unit is ideally suitable for all urological procedures including bipolar coagulation procedures. It is operated with a double pedal footswitch or with conventional handswitching accessories.

List No. 5000 ELMED ELEKTROTOM 600 RFS electrosurgical unit, SMART-O-MATIC circuit, monopolar spark gap generator and bipolar

 

ELMED ELEKTROTOM 400 RFS


The ELMED ELEKTROTOM 400 RFS is a modular unit, incorporating a powerful valve generator and spark-gap generator, conveniently mounted on a special mobile cart. The unit also features a bipolar generator and may be operated by a double pedal footswitch or with conventional handswitching accessories.

List No. 5600  ELMED ELEKTROTOM 400 RFS electrosurgical unit, SMART-O-MATIC circuit, monopolar spark-gap generator and bipolar

 

 

TECHNICAL DATA

 

Electrotom

600 RFS

Electrotom

400 RFS

Output Power: Max Power* Peak-to- Peak Voltage Max Power* Peak-to- Peak Voltage
Generator I, cutting(non-modulated) 200W 2,200V 200W 2,500V
Generator II, spray coagulation(modulated) 100W 5,000V 80W 5,200V
Generator I+II, blended(modulated) 200W 6,500V 200W 6,000V
Generator III, bipolar(non-modulated) 50W 400V 50W 400V
*Monopolar measured at 500 Ohm, Bipolar- at 100Ohms
Dimensions:

34" H x 18" W x 14" D

(87 cm x 46 cm x 36 crn)

10" H x 19" W x 14" D

(25 cm x 48 cm x 36 crn)

Weight: 138 lbs (63 kg) 90 lbs (41 kg)
Power Requirements: 117 Volts, 60 Hz, 10 Amps (Other power requirements on request)

ELMED offers a wide variety of instrumentation and equipment for electrosurgery in urology. We invite your inquiries.