Advanced electrosurgical procedures require special equipment and instruments. The ELMED ESU 70 has been specifically designed for endoscopic procedures, particularly for outpatient.surgery. Spacesaving, printed and solid state circuits in conjunction with other advanced components permit this compact design.

List No. 5201 ELMED ESU 70 DIGITAL, Electrosurgical Unit with SMART-O-MATIC circuit

The ELMED ESU 70 provides radio-frequency current for smooth cutting and contact coagulation. The blended (modulated) current permits cutting with increased hemostasls and spray coagulation.

Selecting the respective accessories, the ELMED ESU 70 may be used for polypectomy in colonoscopy and sigmoidoscopy, as well as for surgical interventions in ENT, plastic, general and veterinary surgery.

THE ELMED ESU 70 FEATURES:

• Pure, radio frequency current for smooth cutting and contact coagulation
• Blended cu rrent for cutti ng with increased hemostasis, particularly suitable for snarl ng of polyps
• Patient return fault monitor with audible indicator and automatic deactivation
• Compatible with most footswitch operated accessories
• Extremely simple operation of unit
• SMART-O-MATIC, automatic compensation circuit which provides the desired output for all electrodes or tissue conditions. The automatic range control, which is divided into ten steps, requires no readjustment within the set range.

TECHNICAL DATA OF THE UNIT:

Mode of Operation: Activation by footswitch (select footswitch of your choice: List No. 5708 explosion proof; List No. 5703 water sealed; List No. 5707 conventional lever action)

RF Output Jack: 4 mm banana plug connection, single conductor to connect to snares, forceps or handles. Select the appropriate cable for the active accessory of your choice.

Patient Return Jack: Two-conductor phone plug for reusable patient plate cable, List No. 5701; or for use with ELMED or other disposable patient plate cables, List No. 5702. Select patient return cables and plates as desired from ELMED or use respective accessories of your choice.

Operating Frequency: 1.75 MHz

Power Supply: 117 V/60 Hz, other voltages available

RF Output: Mode Pure: 70 Watts at 500 Ohm load Mode Blend 1: 70 Watts at 500 Ohm load Mode Blend 11: 50 watts at 500 Ohm load

DIMENSIONS: Height: 5" Length: 13" Depth:11"

WEIGHT: 9 Ibs.

Technical Data for Wattage, Voltage and Frequency: +/- 20%

ACCESSORIES: Select accessories, footswitches, active cords and electrodes as well as return cables and patient plates from our accessory list to suit your individual requirements.

Unit meets latest electrical safety standards of UL 544, CSA, NFPA and FDA-IEC proposed standards.

For more information contact:

ELMED INCORPORATED, 60 West Fay Avenue, Addison, Illinois 60101-5106 USA Telephone Number: (630) 543-2792 FAX Number: (630) 543-2102