The ELMED ESU 120 M/M DIGITAL with SMART-O-MATIC is specifically designed for otolaryngology procedures including general surgery applications, monopolar and bipolar, bipolar submucosal turbinate surgery, the radiofrequency treatment of theuvula , uvulopalatoplasty and tongue base reduction, and the radiofrequency treatment of obstructive tonsillar hypertrophy.

The ELMED ESU 120 M/M DIGITAL with SMART-O-MATIC was developed in collaboration with the most prominent surgeons. It provides the state-of-the art technology, reliability, and safety, at an affordable price.

List No. 5797 ELMED ESU 120 M/M DIGITAL, Electrosurgical Unit with SMART-O-MATIC circuit, select accessories as required

REQUIRED WORKING SYSTEM ACCESSORIES

List NO. 5707	Single pedal footswitch with 5-pin connector

Return Electrode Accessories - Disposable
List No. 5390	Patient plate, disposable, 7 1/2" x 6", 100 pcs.
List No. 5395	Patient plate, disposable, self-adhesive, 6 1/4" x 5 1/4", 25 pcs.
List No. 5702	Return cable for disposable patient plates and ELMED ESU's (reusable)

Return Electrode Accessories - Non-Disposable
List No. 5047	Patient plate, metal, for upper arm
List No. 5044	Rubber strap, 20" long
List No. 5701	Return cable for metal patient plate and ELMED ESU

OPTIONAL ACCESSORIES

List No. 4755	Equipment trolley with one drawer 

THE ELMED ESU 120 M/M DIGITAL WITH SMART-O-MATIC FEATURES:

THREE DISTINCTIVE RADIO FREQUENCY OUTPUT MODES WITH AUTOMATIC
OUTPUT COMPENSATION IN ALL MODES

Mode I		Pure cutting power by means of non-modulated RF-current and blended
(Macro Output) 	power by modulated RF-current for cutting and coagulation

Mode II		Timed by the automatic timing circuit, low power level up to 10 W radio
(Micro Output	frequency current at a low voltage that generates low tissue temperature
RFTA)		specifically for Radio Frequency Thermal Ablation (uvulopalatoplasty and
		tongue base reduction)

Mode III	Bipolar non-modulated current for general bipolar surgical procedures and
		bipolar submucosal turbinate surgery according to Dr. Dennis

DIGITAL READOUT
Each mode has an independent digital wattage readout, as does the timing circuit for 
Radio Frequency Thermal Ablation.

SAFETY CIRCUIT
Automatic sensing device cuts off the output if the indifferent patient circuit is 
defective, and gives visual and audible alarm.  Reusable or disposable electrodes may 
be used.  Optional Return Electrode Monitor (REM) may be installed at extra cost.

The operation of the ELMED ESU 120 M/M DIGITAL with SMART-O-MATIC is extremely easy.
The generator is activated by means of a single pedal footswitch.

SMART-O-MATIC CIRCUIT
Our automatic output compensation circuit provides the desired output for all electrodes
or tissue conditions.  The automatic range control requires no readjustment within the 
set range.

AUTOMATIC TIMING CIRCUIT
The automatic timing circuit is triggered by the footswitch.  The time can be selected
between 1-10 seconds and is shown on the digital display and it will cut off the current
flow as the time has expired, or when the surgeon removes his/her foot from the footswitch.
It is reactivated to the same preset specifications by depressing the footswitch. 

TECHNICAL DATA OF THE UNIT

Operating Frequency: 500 KHz

Power Supply: 117 V/60 Hz, other power requirements upon request

RF Output: Mode Pure: 100 Watts at 300 Ohm load, Mode Blend 1: 100 Watts at 300 Ohm load, Mode Bipolar: 50 watts at 100 Ohm load

Micro Setting, Monopolar, RFTA: Up to 10 Watts, low voltage sinusoidal RF-current operating through a timing circuit between one and ten seconds, controlled by the footswitch.

DIMENSIONS: Height: 6" Length: 15 1/2" Depth:12 1/2"

WEIGHT: 14 lbs.

For more information contact:

ELMED INCORPORATED, 60 West Fay Avenue, Addison, Illinois 60101-5106 USA Telephone Number: (630) 543-2792 FAX Number: (630) 543-2102